Boonton 4500B Peak Power Meter Bedienungsanleitung PDF herunterladen (Seite 94)

Boonton 4500B RF Peak Power Analyzer

Operation

4-22

Table 4-4A. Chan # > Extensions > Corrections > Submenu (continued)

Menu Item Function

(Type) Selections (SCPI cmd)

Freq CF Pulse, Mod & Stat Display(or enter) the Frequency cal-factor

(Numeric) Continuous range:

3 dB This menu box displays the value of the current Frequency cal-factor.

This cal-factor is calculated by interpolation, if necessary, from a table

Meas

> Freq CH # menu box. This value can be overwritten using any of the



measurements until the Frequency is changed or the instrument is

initialized or re-started. At that time the interpolated value will be

restored.

SENSe[1|2]:CORRection:CALFactor < -3.00 to 3.00>

Temp Comp Pulse, Mod & Stat For temperature compensated sensors only, turns Temperature

Compensation On or Off

(Toggle) On, Off

This function defaults to On for sensors that have a valid temperature

compensation table. It may be turned Off for unusual testing situations.

For uncompensated sensors, this menu box does not appear and the

function is forced to Off.

SENSe[1/2]:CORRection:TEMPcomp {ON, OFF}

Table 4-4B. Chan # > Extensions > Define Pulse > Submenu

Menu Item Function

(Type) Selections (SCPI cmd)

Distal Pulse Sets the percentage of pulse amplitude defining the distal.

(Numeric) Continuous Range

The distal is normally defined as 90% of the pulse top level amplitude.

The range is from the 20% to 99.00%.

SENSe[1|2]:PULSe:DISTal <20.00 to 99.00> (percent)

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 371 372

Keine Kommentare

Boonton 4500B Peak Power Meter Bedienungsanleitung Seite 94