Boonton 4500B Peak Power Meter Bedienungsanleitung PDF herunterladen (Seite 221)

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-21

DISPlay:PARAmeter:MODE

Description: Set or return the type of content displayed in the parameter area above the trace box. The STAT

(status) command causes a fixed set of nine status parameters for the active channel to be

displayed. The MEAS command causes a group of nine user selected auto-measure and fixed

parameters from any measurement channel to be displayed.

Syntax: DISPlay:PARAmeter:MODE <asc>

Argument: <asc> = {MEAS, STAT}

Valid Modes: Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.

Statistical mode displays a fixed combination of status and auto-measure parameters.

DISPlay:CHANnel:BOTtom:LEFT

Description: Set or return the channel for the auto-measure or fixed parameter displayed in the Bottom row,

Left column of the nine element parameter field above the trace box.

DISPlay:PARAmeter:MODE must be set to MEAS.

Syntax: DISPlay:CHANnel:BOTtom:LEFT <asc>

Argument: <asc> = {CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2}

Valid Modes: Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.

Statistical mode displays a fixed combination of status and auto-measure parameters.

DISPlay:CHANnel:BOTtom:MIDdle

Description: Set or return the channel for the auto-measure or fixed parameter displayed in the Bottom row,

Middle column of the nine element parameter field above the trace box.

DISPlay:PARAmeter:MODE must be set to MEAS.

Syntax: DISPlay:CHANnel:BOTtom: MIDdle <asc>

Argument: <asc> = {CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2}

Valid Modes: Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.

Statistical mode displays a fixed combination of status and auto-measure parameters.

DISPlay:CHANnel:BOTtom:RIGHt

Description: Set or return the channel for the auto-measure or fixed parameter displayed in the Bottom row,

Right column of the nine element parameter field above the trace box.

DISPlay:PARAmeter:MODE must be set to MEAS.

Syntax: DISPlay:CHANnel:BOTtom: RIGHt <asc>

Argument: <asc> = {CH1, CH2, TRIG1, TRIG2, CHM, MEM1, MEM2}

Valid Modes: Pulse Mode only. Note: Modulated mode does not display Status and Measurement parameters.

Statistical mode displays a fixed combination of status and auto-measure parameters.

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 371 372

Keine Kommentare

Boonton 4500B Peak Power Meter Bedienungsanleitung Seite 221