Boonton 4500B Peak Power Meter Bedienungsanleitung PDF herunterladen (Seite 236)

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-36

FETCh:ARRay:TEMPerature:CALTemp?

Description: Return the internal temperature of the Channel 1 and Channel 2 peak power sensors at the at the

time of autocalibration. Note: If a non-temperature compensated peak sensor is in use, the 4500B

displays a warning message if the temperature has drifted more than 4C from the autocal

temperature.

Syntax: FETCh:ARRay:TEMPerature:CALTemp?

Returns: CC1, Sensor1 AutoCal Temp in degrees C, CC2, Sensor2 AutoCal Temp in degrees C

Where CC1 and CC2 are the measurement condition codes.

Valid Modes: All

FETCh:ARRay:TEMPerature:CURRent?

Description: Return the current internal temperature of the Channel 1 and Channel 2 peak power sensors. Note:

If a non-temperature compensated peak sensor is in use, the 4500B displays a warning message if

the temperature has drifted more than 4C from the autocal temperature.

Syntax: FETCh:ARRay:TEMPerature:CURRent?

Returns: CC1, Sensor1 Temp in degrees C, CC2, Sensor2 Temp in degrees C

Where CCn is the measurement condition code.

Valid Modes: All

FETCh:CW:POWer?

Description: Return current average amplitude reading in channel units.

Syntax: FETCh[1|2|3|4|5|6|7]:CW:POWer?

Returns: CC, average power (watts, dBm) or average voltage (volts, dBv)

Where CC is the measurement condition code.

Valid Modes: Modulated and Statistical modes.

FETCh:INTERval:AVERage?

Description: For the specified channel, return the average power or voltage between marker 1 and marker 2.

The units will be the same as the specified channel.

Syntax: FETCh[1|2|3|4|5|6|7]:INTERval:AVERage?

Returns: CC, average power or voltage between markers

Where CC is the measurement condition code.

Valid Modes: Pulse and Modulated

1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 371 372

Keine Kommentare

Boonton 4500B Peak Power Meter Bedienungsanleitung Seite 236