Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung PDF herunterladen (Seite 218)

Boonton 4540 Series RF Power Meter

Remote Operation

5-84

Table 5-1. SCPI COMMAND SUMMARY (continued)

DISPlay:SCREensaver:STATe Set/return state of screensaver mode. <Boolean> = { 0, 1, OFF,

ON }

DISPlay:SCREensaver:TIMe Set/return time until display dims. <numeric_value> = 1 through

180

DISPlay:[TEXt:]LIN:RESolution Set number of significant digits for linear displays and remote

return values. <numeric_value> = 3 to 5

DISPlay:[TEXt:]LOG:RESolution Set number of decimal places for log displays and remote return

values. <numeric_value> = 0 to 3

DISPlay:TRACe[1|2]:HOFFSet Set/return the horizontal offset for statistical mode in dBr.

<numeric_value> = -50.00 to +50.00 dBr

DISPlay:TRACe[1|2]:HSCALE Set/return the horizontal scale for statistical mode in dB/Div.

<numeric_value> = 0.1 to 5.0 dB/Div in 1-2-5 sequence

DISPlay:TRACe[1|2]:VCENTer Change vertical center based on current units.

Ex:<numeric_value> = 1.23

DISPlay:TRACe[1|2]:VSCALe Change vertical scale based on current units. Ex:<numeric_value>

= 20 set to 20dB/div (current units)

FETCh[1|2]:ARRay:AMEAsure:POWer? Return current Ppeak, Pavgcyc, Pavgpulse, Ptop, Pbot, Overshoot

FETCh[1|2]:ARRay:AMEAsure:STATistical? Return current Pavg, Ppeak, Pmin, PkToAvgRatio, CursorPwr,

CursorPct, Sample-Count

FETCh[1|2]:ARRay:AMEAsure:TIMe? Return current Freq, Period, Width, Offtime, Dcyc, Risetime,

Falltime

FETCh[1|2]:ARRay:CW:POWer? Return current Pavg, Pmax, Pmin, Ppulse or Pk/Avg

FETCh[1|2]:ARRay:MARKer:POWer? Return current Pavg, Pmax, Pmin, P/Avg, Pmrk1, Pmrk2,

Pmrk1/Pmrk2

FETCh:ARRay:TEMPerature:AVERage? Return the average sensor temperature from CH1 and CH2.

FETCh:ARRay:TEMPerature:CURRent? Return the instantaneous sensor temperature from CH1 and CH2.

FETCh[1|2]:CW:POWer? Return current average reading in power units

FETCh[1|2]:INTERval:AVERage? Return average power between MK1 and MK2.

FETCh[1|2]:INTERval:MAXFilt? Return maximum filtered power between MK1 and MK2.

FETCh[1|2]:INTERval:MINFilt? Return minimum filtered power between MK1 and MK2.

FETCh[1|2]:INTERval:MAXimum? Return maximum instantaneous power between MK1 and MK2.

FETCh[1|2]:INTERval:MINimum? Return minimum instantaneous power between MK1 and MK2.

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 269 270

Keine Kommentare

Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung Seite 218