Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung PDF herunterladen (Seite 109)

Boonton 4540 Series RF Power Meter

Operation

4-61

4.5.38 System > I/O Config > Ethernet > Extensions Menu

The Ethernet Extensions menu contains menu items for displaying and editing the IP address, subnet mask, default gateway.

There is also a read-only menu for the MAC address.

Main Pg 2 > System > I/O Config > Ethernet > Extensions > IP Address

Description: Set the Internet Protocol (IP) address of the Ethernet

adapter. Note: If DHCP/AutoIP mode is enabled,

this menu is read-only.

Menu Type: Numeric Value.

Format: IP address in nnn.nnn.nnn.nnn (―dot decimal‖) format

SCPI Command: SYSTem:COMMunicate:LAN:ADDRess

Main Pg 2 > System > I/O Config > Ethernet > Extensions > Subnet Mask

Description: Set the subnet mask for the Ethernet adapter. Note: If

DHCP/AutoIP mode is enabled, this menu is read-

only.

Menu Type: Numeric Value.

Format: Subnet mask in nnn.nnn.nnn.nnn (―dot decimal‖)

format

SCPI Command: SYSTem:COMMunicate:LAN:SMASk

Main Pg 2 > System > I/O Config > Ethernet > Extensions > Def. Gateway

Description: Set the default gateway address for the Ethernet

adapter. Note: If DHCP/AutoIP mode is enabled, this menu is read-only.

Menu Type: Numeric Value.

Format: IP address in nnn.nnn.nnn.nnn (―dot decimal‖) format

SCPI Command: SYSTem:COMMunicate:LAN:DGATeway

Fig. 4-49 Ethernet

Extensions Menu

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 269 270

Keine Kommentare

Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung Seite 109