Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung PDF herunterladen (Seite 149)

Boonton 4540 Series RF Power Meter

Remote Operation

5-15

CALCulate:STATe

Description: Set or return the measurement state of the selected channel. When ON, the channel performs

measurements; when OFF, the channel is disabled and no measurements are performed.

Syntax: CALCulate[1|2]:STATe <Boolean>

Argument: <Boolean> = { 0, 1, OFF, ON }

Valid Modes: Any

CALCulate:UNITs

Description: Set or return units for the selected channel. For power sensors, voltage is calculated with

reference to the sensor input impedance. Note that for ratiometric results, logarithmic units will

always return dBr (dB relative) while linear units return percent.

Syntax: CALCulate[1|2]:UNITs <character data>

Argument: <character data> = {DBMw, Watts, Volts, DBV, DBMV, DBUV}

Valid Modes: Any

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 269 270

Keine Kommentare

Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung Seite 149