Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung PDF herunterladen (Seite 187)

Boonton 4540 Series RF Power Meter

Remote Operation

5-53

SENSe:ARRay:CALTemp?

Description: Returns both channels’ sensor calibration temperatures.

Syntax: SENSe:ARRay:CALTemp?

Returns: CC1, Sensor1 cal temp in degrees C, CC2, Sensor2 cal temp in degrees C

Where CCn is the measurement condition code.

Valid Modes: All

SENSe:CALTemp?

Description: Returns the selected channel’s sensor calibration temperature.

Syntax: SENSe[1|2]:CALTemp?

Returns: CC, Sensor[1|2] cal temp in degrees C

Where CCn is the measurement condition code.

Valid Modes: All

SENSe:CORRection:CALFactor

Description: Set or return the frequency calfactor currently in use on the selected channel. Note setting a

calfactor with this command will override the ―automatic‖ frequency calfactor that was calculated

and applied when the operating frequency was set, and setting the operating frequency will

override this calfactor setting.

Syntax: SENSe[1|2]:CORRection:CALFactor <numeric_value>

Argument: <numeric_value> = –3.00 to 3.00 dB

Valid Modes: All

SENSe:CORRection:DCYCle

Description: Set or return the duty cycle correction factor currently in use on the selected channel.

Syntax: SENSe[1|2]:CORRection:DCYCle

Argument: <numeric_value> = 0.01 to 100.00 percent

Valid Modes: CW Sensor (Modulated Mode)

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 269 270

Keine Kommentare

Boonton 4540 Peak Power Meter User Manual Bedienungsanleitung Seite 187