Boonton 9240 RF Voltmeter Bedienungsanleitung PDF herunterladen (Seite 76)

Boonton 9240 Series RF Voltmeter

STATus:OPERation:CONDition?

Description: Return the current value of the Operation Condition register. The following table shows the bit

assignments in the register. These bits are updated by the instrument in real time, and can change

in response to changes in the instrument’s operating condition.

Bit Value Definition

0 1 Zeroing 1 = probe zeroing in progress.

1 2 Settling 1 = averaging filter is not full.

2 4 Ranging 1 = range change in progress.

3 8 Not used always returns 0.

4 16 Measuring 1 = measurement in progress.

5 32 Triggering 1 = Trigger mode enabled waiting for a trigger.

6 64 Not used always returns 0.

7 128 Not used always returns 0.

8 256 Alarm 1 1 = Channel 1 is in an alarm condition.

9 512 Alarm 2 1 = Channel 2 is in an alarm condition.

10 1024 Alarm Latch 1 1 = Channel 1 alarm is latched.

11 2048 Alarm Latch 2 1 = Channel 2 alarm is latched.

12 4096 Not used always returns 0

13 8192 Not used always returns 0.

14 16384 Not used always returns 0.

15 32768 Not used always returns 0.

Syntax: STATus:OPERation:CONDition?

Returns: 16-bit register value (0 to 65535)

STATus:OPERation:ENABle

Description: Sets or returns the Operation Enable register, which contains the bit mask that defines which true

conditions in the Operation Status Event register will be reported in the Operation Summary bit of

the instrument Status Byte. If any bit is 1 in the Operation Enable register and its corresponding

Operation Event bit is true, the Operation Status summary bit will be set.

Syntax: STATus:OPERation:ENABle <numeric value>

Argument: <numeric value> = 0 to 65535

Returns: 16-bit register value (0 to 65535)

STATus:OPERation:EVENt?

Description: Returns the current contents of the Operation Event register then resets the register value to 0. The

Operation Event register contains the latched events from the Operation Condition register as

specified by the Operation status group’s positive and negative transition filters.

Syntax: STATus:OPERation:EVENt?

Returns: 16-bit register value (0 to 65535)

Remote Operation

5-26

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 99 100

Keine Kommentare

Boonton 9240 RF Voltmeter Bedienungsanleitung Seite 76